Bugbusters Companionway Insects Screens -Sogeman
Models
Selected Model: MD3672
* Prices are in Canadian dollars. Taxes and shipping not included.
MFG : MD3672 - 36"x 72"
MFG : MD3844 - 38" x 44"
MFG : MD4077 - 40" x 77"
MFG : MD6068 - 60" x 78"
MFG : MD4868 - 48" x 68"
Bugbusters companionway insects screens -Sogeman
A simple solution for no-see-ums, mosquitos and other bugs. Unique to the market, the Bugbusters companionway insects screens ties to the handrails or is fixed with our new snap kit and drops down to the cockpit floor. No velcro or frame needed. Allows full companionway opening permitting very easy access to and from cockpit.
Features & Specs:
- Installs easily with 2 knots to hand rails with built-in ties or with our new snap kit (see below)
- Lead ballasted (will not affect compass)
- 100% Polyester mesh, Military Spec, Flame Retardant
- 24 Very small Holes/Inch or about 1mm, No-see-um proof
- Allows easy access to and from cockpit
Bugbusters Companionway screens come in different convenient sizes:
| Sizes | |||
| MD3672 72” long x 36” wide (91cm x 183cm) | Rectangle | View Drawing | Standard: fits most small sailboats |
| MD7842 78” long x 42” wide(198cm x 107cm) | Rectangle | View Drawing | Bigger Rectangular size Good for big catamarans, powerboats |
| MD4077 77” long x 40” wide (196cm x 102cm) | Tapered | View Drawing | Fit many Beneteau's and Jeanneau's, MacGregor 26X (tapering to 28" wide at bottom) |
| MD6068 68” long x 48” wide (173cm x 122cm) | Tapered | View Drawing | Catalina (except 30, 380, 400), Caliber, Endeavour (tapering to 28" wide at bottom) |
| MD3844 44” long x 38” wide (112cm x 97cm) | Tapered | View Drawing | Catalina 380, 400 (tapering to 29" wide at bottom) |
| MD6068 68” long x 60” wide (173cm x 152cm) | Tapered | View Drawing | Catalina 30 (tapering to 28" wide at bottom) |
Measurements: Measure maximum inside measurement from forward of companionway to bottom and add about 2-3 inches. Then take width outside companionway sides and add height of sides over the roof, to get width of screen. Example: A 30" x 68" inside opening, would use a 36" x 72" screen.On the tapered screens, the tapering begins at the halfway point of the length, 34" and 39" respectively. For the 44 x 38 screen, the taper begins at 26 inches.
| Companionway measurement: | Take time to measure before ordering. |
 |
|
| 1-First measure Top opening "A" distance 2-Measure Vertical Height "B" from top to bottom, where the sceen lead weight will stand 3-Add "A" to "B" plus approximately 3 inches to get total length of screen 4-Measure "C" distance, outside handrails, and add heigh of handrail over the roof, on each side, to get width of screen 5-On some boats, it is best to use a tapered screen, so measure "D" and add 1-2 inches on each sideNOTES: Don't worry, Companionway screens can be up to 20% longer and 10-15% larger than measured ideal. You can install a taller screen in positionning it a little forward, if possible, and remaining will lay on the bottom, outside of companionway entrance. Lead beads will also hold a wider than ideal screen. We now have convenient optionnal snap kits for easy installation inside dodger or if you do not have siderails. | |
| Example: For a 2008 Beneteau Oceanis 37 we took the following measurements: 1-Measure "A": 38" 2-Measure "B": 36" 3-Add "A" to "B": 74" PLUS 3" = 77" 4-Measure "C": 32" PLUS 3" PLUS 3" = 38" 5-Measure "D": 21"We then choose a 40" x 77" companionway for a perfect fit (a little bit wider but OK). | |
